Pipes made of fluoroplastic-4D and 4DM

Pipes made of fluoroplastic-4D and 4DM

ТУ 2247-080-00203521-2005
Road and rail transport
Food production
Pharmaceutics
Oil and gas production and processing

Get information about the product in the mail

 PTFE pipes can be used for a wide range of purposes. They have all the advantages of the fluoropolymer they are made of. They have high chemical resistance to corrosive mediums, good dielectric properties, are heat-resistant and operable in different climatic conditions.

Our PTFE pipes can be used:

  • to transport pressurized gas and corrosive liquids (except for molten alkali metals, chlorine trifluoride, and fluorine);

  • to produce various parts meant for insulation and corrosion resistance;

  • to produce high and low pressure hoses with metal or aramid (Kevlar) braid (also called cell tubes);

  • to seal pump and compressor units.

Operating temperatures range from -60 °C to +230 °C.

We produce PTFE tubes ranging from 5 to 32 mm in diameter.

The main technical characteristics of PTFE pipes


NPS, mm

Inner diameter, mm

Nominal wall thickness, mm

Maximum length, m

Test pressure, MPa, (kgf/cm2), not less than

PTFE pressure tubes

5

5

1.00

15

1.96 (20.0)

6

6

1.00

15

1.57 (16.0)

8

7.5; 8

2.00; 1.50

15; 9

2.45; 1.57 (25.0; 16.0)

12

12

1.50

9

1.08 (11.0)

PTFE cell tubes

4

4.7

1.00

15

1.96 (20.0)

6

6.5

1.00

15

1.57 (16.0)

8

9.1

1.40

9

1.57 (16.0)

10

10.7

1.40

9

1.28 (13.0)

12

12.8

1.40

9

1.08 (11.0)

15

15.8

1.50

6

0.98 (10.0)

20

22

1.60

5

0.68 (7.0)

25

28

1.65

5

0.59 (6.0)

32

38.5

1.65

5

0.49 (5.0)


Note:

  • The density of PTFE pressure tubes and cell tubes does not exceed 2.145 g/cm3

  • Tubes of other sizes may be produced by agreement with the customer

Hygiene certificate №78 СП 06 224T 03209Г 98 of 16.02.1998.